Stevy on November 26th, 2012

Customization file loaded successfully. Customization Group: ACAD
Customization file loaded successfully. Customization Group: CUSTOM
Customization file loaded successfully. Customization Group: IMPRESSION
Customization file loaded successfully. Customization Group: AUTODESKSEEK
Customization file loaded successfully. Customization Group: EXPRESS

Opening an AutoCAD 2010 format file.

Loading Modeler DLLs.

AutoCAD menu utilities loaded.

Autodesk DWG. This file is a TrustedDWG last saved by an Autodesk application
or Autodesk licensed application.

Regenerating model.
AutoCAD menu utilities loaded.
Command: ‘_units
Command:
Command:
Command: _rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:
Specify other corner point or [Area/Dimensions/Rotation]: @180,80
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] : .5x
Regenerating model.
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] : .5x
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] : .5x
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]: 40
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]: 40
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command:
Command:
Command:
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]: 40
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter]: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter]: 20
Command:
Command: MI
MIRROR 1 found
Specify first point of mirror line: Specify second point of mirror line:
Erase source objects? [Yes/No] :
Command:
Command: _.erase 1 found
Command:
Command:
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: M
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: R
Specify fillet radius <0.0000>: 40
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: M
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: _u
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: *Cancel*
Command:
Command: _.erase 1 found
Command: FILLET
Current settings: Mode = TRIM, Radius = 40.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: R
Specify fillet radius <40.0000>: 40
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner:
Command: *Cancel*
Command:
Command:
Command: _ai_selall Selecting objects…done.

Command: _u INTELLIZOOM
Command: _u COPY
Command:
Command: copy
1 found

Specify base point or [Displacement] : d

Specify displacement <0.0, 0.0, -400.0>: @-200,0,0

Command:
COPY
Select objects: 1 found

Select objects:

Specify base point or [Displacement] :

Specify displacement <-200.0, 0.0, 0.0>:

Command:
COPY
Select objects: 1 found

Select objects:

Specify base point or [Displacement] :

Specify displacement <-200.0, 0.0, 0.0>:

Command:
COPY
Select objects: 1 found

Select objects:

Specify base point or [Displacement] :

Specify displacement <-200.0, 0.0, 0.0>:

Command:
Command:
COPY 1 found

Specify base point or [Displacement] :

Specify displacement <-200.0, 0.0, 0.0>:

Command:
Command:
COPY 1 found

Specify base point or [Displacement] :

Specify displacement <-200.0, 0.0, 0.0>:

Command:
Command:
COPY 1 found

Specify base point or [Displacement] :

Specify displacement <-200.0, 0.0, 0.0>:

Command:
Command:
COPY 1 found

Specify base point or [Displacement] :

Specify displacement <-200.0, 0.0, 0.0>:

Command:
Command:
COPY 1 found

Specify base point or [Displacement] :

Specify displacement <-200.0, 0.0, 0.0>:

Command:
Command:
COPY 1 found

Specify base point or [Displacement] :

Specify displacement <-200.0, 0.0, 0.0>:

Command:
Command:
COPY 1 found

Specify base point or [Displacement] :

Specify displacement <-200.0, 0.0, 0.0>:

Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]: *Cancel*

Command:
Command:
Command: _line Specify first point: *Cancel*

Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:

Command:
Command: mi
MIRROR 1 found
Specify first point of mirror line: Specify second point of mirror line:
Erase source objects? [Yes/No] :

Command:
MIRROR
Select objects: 1 found

Select objects:
Specify first point of mirror line:

Invalid 2D point.
Specify first point of mirror line:

Invalid 2D point.
Specify first point of mirror line: mi

Invalid 2D point.
Specify first point of mirror line: *Cancel*

Command:
Command: mi
MIRROR 1 found
Specify first point of mirror line: Specify second point of mirror line:
Erase source objects? [Yes/No] :

Command:
MIRROR
Select objects: *Cancel*

Command:
Command:
Command:
Command:
Command: mi
MIRROR 4 found
Specify first point of mirror line: Specify second point of mirror line:
Erase source objects? [Yes/No] :

Command:
Command: Specify opposite corner:
Command:
Command:
Command:
Command:
Command:
Command: mi
MIRROR 6 found
Specify first point of mirror line: Specify second point of mirror line:
Points must be distinct.

Command:
MIRROR
Select objects: 1 found

Select objects: 1 found, 2 total

Select objects: 1 found, 3 total

Select objects: 1 found, 4 total

Select objects: Specify opposite corner: 2 found, 6 total

Select objects: *Cancel*

Command:
Command:
Command:
Command:
Command:
Command:
Command: mi
MIRROR 6 found
Specify first point of mirror line: Specify second point of mirror line:
Erase source objects? [Yes/No] :

Command:
Command: *Cancel*

Command:
Command: *Cancel*

Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command:
Command: _.erase 1 found

Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*

Command: *Cancel*

Command:
Command: _.erase 1 found

Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:

Command:
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:

Command:
Command: copy
1 found

Specify base point or [Displacement] : *Cancel*

Command:
Command:
Command: copy
2 found

Specify base point or [Displacement] : Specify second point or
:
Specify second point or [Exit/Undo] :
Specify second point or [Exit/Undo] :
Specify second point or [Exit/Undo] : *Cancel*

Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:

Command:
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:

Command:
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:

Command:
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:

Command:
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:

Command:
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:

Command:
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]:
Specify next point or [Close/Undo]:

Command:
LINE Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:

Command:
Automatic save to C:\Users\Wind\AppData\Local\Temp\greenhouse_1_1_0843.sv$ …

Customization file loaded successfully. Customization Group: ACAD
Customization file loaded successfully. Customization Group: CUSTOM
Customization file loaded successfully. Customization Group: IMPRESSION
Customization file loaded successfully. Customization Group: AUTODESKSEEK
Customization file loaded successfully. Customization Group: EXPRESS

Opening an AutoCAD 2010 format file.

Loading Modeler DLLs.

AutoCAD menu utilities loaded.

Autodesk DWG. This file is a TrustedDWG last saved by an Autodesk application
or Autodesk licensed application.

Command:
Command: move
1 found

Specify base point or [Displacement] : *Cancel*

Command:
Command:
Command: move
2 found

Specify base point or [Displacement] : Specify second point or
:
Command:
Command: copy
1 found

Specify base point or [Displacement] : *Cancel*

Command:
Command:
Command: copy
2 found

Specify base point or [Displacement] : Specify second point or
:
Specify second point or [Exit/Undo] :
Specify second point or [Exit/Undo] :
Specify second point or [Exit/Undo] :
Specify second point or [Exit/Undo] :
Specify second point or [Exit/Undo] :
Specify second point or [Exit/Undo] :
Specify second point or [Exit/Undo] :
Specify second point or [Exit/Undo] : *Cancel*

Command:
Command: copy
1 found

Specify base point or [Displacement] : Specify second point or
: *Cancel*

Command:
Command:
Command: copy
2 found

Specify base point or [Displacement] : Specify second point or
:
Specify second point or [Exit/Undo] : *Cancel*

Command:
Command:
Command: _box
Specify first corner or [Center]:
Specify other corner or [Cube/Length]: 10

Specify height or [2Point] <-10.0>: 10

Command:
Command:
Command: *Cancel*

Command:
Command:
Specify point location or [Base point/Undo/eXit]: 2.1

Command:
Specify point location or [Base point/Undo/eXit]: *Cancel*

Command:
Command: *Cancel*

Command:
Command:
Specify point location or [Base point/Undo/eXit]: 2.1

Point or option keyword required.

Specify point location or [Base point/Undo/eXit]:
Command: *Cancel*

Command:
Command:
Specify point location or [Base point/Undo/eXit]:
Command: *Cancel*

Command:
Command:
Specify point location or [Base point/Undo/eXit]: *Cancel*

Command: *Cancel*

Command:
Command:
Specify point location or [Base point/Undo/eXit]: 2500

Command:
Command:
Command: move
3 found

Specify base point or [Displacement] : Specify second point or
:
Command: *Cancel*

Command:
Command:
Command: _qsave

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: _u Grip Edit
Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: _u Grip Edit
Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command: _.erase 2 found

Command: _u ERASE
Command:
Command: _.erase 1 found

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*

Command:
Command: mi
MIRROR 1 found
Specify first point of mirror line: Specify second point of mirror line:
Checking 741 intersections…
Erase source objects? [Yes/No] :

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 100

Command: _u INTELLIZOOM INTELLIZOOM
Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 100

Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 100

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 100

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 100

Command:
Command:
Command: *Cancel*

Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command: _.erase 7 found

Dimension disassociated.
Command:
Command: *Cancel*

Command:
Command:
Specify point location or [Base point/Undo/eXit]: 50

Command:
Specify point location or [Base point/Undo/eXit]: 50

Command: _u INTELLIZOOM
Command: _u Grip Edit
Command:
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _top Regenerating model.

Command: *Cancel*

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Command:
Command:
Command:
Command: mi
MIRROR 4 found
Specify first point of mirror line: Specify second point of mirror line:
Erase source objects? [Yes/No] :

Command:
Command:
Command:
Command: mi
MIRROR 3 found
Specify first point of mirror line: Specify second point of mirror line:
Erase source objects? [Yes/No] :

Command:
Command: _.erase 1 found

Command:
Command: mi
MIRROR 1 found
Specify first point of mirror line: Specify second point of mirror line:
Erase source objects? [Yes/No] :

Command:
Command:
Command:
Command:
Command: _.erase 4 found

Command:
Command:
Command: Specify opposite corner:
Command:
Command:
Command: mi
MIRROR 4 found
Specify first point of mirror line: Specify second point of mirror line:
Erase source objects? [Yes/No] :

Command:
Command:
Command:
Command:
Command: mi
MIRROR 4 found
Specify first point of mirror line: Specify second point of mirror line:
Erase source objects? [Yes/No] :

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left Regenerating model.

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*

Command: *Cancel*

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 100

Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*

Automatic save to C:\Users\Wind\AppData\Local\Temp\greenhouse_1_1_4464.sv$ …

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 100

Command:
Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 100

Command:
Command: *Cancel*

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*

Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*

Command:
Command:
Command:
Command: _rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:
*Cancel*

Command:
Command:
Command: _rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:
*Cancel*

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left Regenerating model.

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 250

Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 100

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left Regenerating model.

Command:
Automatic save to C:\Users\Wind\AppData\Local\Temp\greenhouse_1_1_4464.sv$ …

Customization file loaded successfully. Customization Group: ACAD
Customization file loaded successfully. Customization Group: CUSTOM
Customization file loaded successfully. Customization Group: IMPRESSION
Customization file loaded successfully. Customization Group: AUTODESKSEEK
Customization file loaded successfully. Customization Group: EXPRESS

Opening an AutoCAD 2010 format file.

Loading Modeler DLLs.

AutoCAD menu utilities loaded.

Autodesk DWG. This file is a TrustedDWG last saved by an Autodesk application
or Autodesk licensed application.

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 20

Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left Regenerating model.

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Command:
Command:
Command: _pline
Specify start point: *Cancel*

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: move
1 found

Specify base point or [Displacement] : Specify second point or
:
Command:
Command: move
1 found

Specify base point or [Displacement] : Specify second point or
:
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _top Regenerating model.

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left Regenerating model.

Command:
Command:
Command: _pline
Specify start point:
Current line-width is 0.0
Specify next point or [Arc/Halfwidth/Length/Undo/Width]:
Specify next point or [Arc/Close/Halfwidth/Length/Undo/Width]: 5

Specify next point or [Arc/Close/Halfwidth/Length/Undo/Width]:
Specify next point or [Arc/Close/Halfwidth/Length/Undo/Width]:
Specify next point or [Arc/Close/Halfwidth/Length/Undo/Width]:

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command: _.erase 7 found

Dimension disassociated.
Command:
Command: *Cancel*

Command:
Command:
Specify point location or [Base point/Undo/eXit]: 50

Command:
Specify point location or [Base point/Undo/eXit]: 50

Command: _u INTELLIZOOM
Command: _u Grip Edit
Command:
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _top Regenerating model.

Command: *Cancel*

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Command:
Command:
Command:
Command: mi
MIRROR 4 found
Specify first point of mirror line: Specify second point of mirror line:
Erase source objects? [Yes/No] :

Command:
Command:
Command:
Command: mi
MIRROR 3 found
Specify first point of mirror line: Specify second point of mirror line:
Erase source objects? [Yes/No] :

Command:
Command: _.erase 1 found

Command:
Command: mi
MIRROR 1 found
Specify first point of mirror line: Specify second point of mirror line:
Erase source objects? [Yes/No] :

Command:
Command:
Command:
Command:
Command: _.erase 4 found

Command:
Command:
Command: Specify opposite corner:
Command:
Command:
Command: mi
MIRROR 4 found
Specify first point of mirror line: Specify second point of mirror line:
Erase source objects? [Yes/No] :

Command:
Command:
Command:
Command:
Command: mi
MIRROR 4 found
Specify first point of mirror line: Specify second point of mirror line:
Erase source objects? [Yes/No] :

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left Regenerating model.

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*

Command: *Cancel*

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 100

Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*

Automatic save to C:\Users\Wind\AppData\Local\Temp\greenhouse_1_1_4464.sv$ …

Customization file loaded successfully. Customization Group: ACAD
Customization file loaded successfully. Customization Group: CUSTOM
Customization file loaded successfully. Customization Group: IMPRESSION
Customization file loaded successfully. Customization Group: AUTODESKSEEK
Customization file loaded successfully. Customization Group: EXPRESS

Opening an AutoCAD 2010 format file.

Loading Modeler DLLs.

AutoCAD menu utilities loaded.

Autodesk DWG. This file is a TrustedDWG last saved by an Autodesk application
or Autodesk licensed application.

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 100

Command:
Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 100

Command:
Command: *Cancel*

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*

Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*

Command:
Command:
Command:
Command: _rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:
*Cancel*

Command:
Command:
Command: _rectang
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:
*Cancel*

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left Regenerating model.

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 250

Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 100

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left Regenerating model.

Command:
Automatic save to C:\Users\Wind\AppData\Local\Temp\greenhouse_1_1_4464.sv$ …

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: 20

Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left Regenerating model.

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Command:
Command:
Command: _pline
Specify start point: *Cancel*

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: move
1 found

Specify base point or [Displacement] : Specify second point or
:
Command:
Command: move
1 found

Specify base point or [Displacement] : Specify second point or
:
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _top Regenerating model.

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _left Regenerating model.

Command:
Command:
Command: _pline
Specify start point:
Current line-width is 0.0
Specify next point or [Arc/Halfwidth/Length/Undo/Width]:
Specify next point or [Arc/Close/Halfwidth/Length/Undo/Width]: 5

Specify next point or [Arc/Close/Halfwidth/Length/Undo/Width]:
Specify next point or [Arc/Close/Halfwidth/Length/Undo/Width]:
Specify next point or [Arc/Close/Halfwidth/Length/Undo/Width]:

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Automatic save to C:\Users\Wind\AppData\Local\Temp\greenhouse_1_1_4464.sv$ …

Command:
Command:
Command:
Command: _extrude
Current wire frame density: ISOLINES=41 found

Specify height of extrusion or [Direction/Path/Taper angle] <-5200.0>: 10

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _top Regenerating model.

Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command:
Command: copy
1 found

Specify base point or [Displacement] : *Cancel*

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command:
Command: _line Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*

Command:
Command:

** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: *Cancel*

Command: *Cancel*

Command:
Command: _.erase 1 found

Command:
Command:
Command: _-view Enter an option
[?/Delete/Orthographic/Restore/Save/sEttings/Window]: _swiso Regenerating model.

Command:
Command:
Command:
Command: _extrude
Current wire frame density: ISOLINES=41 found

Cannot sweep or extrude an object of this type.
Select objects to extrude: 1 found

Select objects to extrude:

Cannot sweep or extrude an object of this type.
Select objects to extrude: *Cancel*

Command:
Automatic save to C:\Users\Wind\AppData\Local\Temp\greenhouse_1_1_4464.sv$ …

Command:
Command:
Command: _qsave
Command:
Command:
Command: _ai_selall Selecting objects…done.

Command: *Cancel*

Command: COMMANDLINE

Command: *Cancel*

Command: *Cancel*

Command:

Command: *Cancel*

Command: *Cancel*

Command:
Regenerating layout.

Command:
Command:
Command:
Command:
Command: _mtedit
Command:
Command: Specify opposite corner: *Cancel*

Command: _.MSPACE
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: Specify opposite corner: *Cancel*

Command: Specify opposite corner:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: Specify opposite corner: *Cancel*

Command: *Cancel*

Command: _u MSPACE
Command:
Command:
Command:
Command: *Cancel*

Command: *Cancel*

Command:
Command: Specify opposite corner:
Command: Specify opposite corner: *Cancel*

Command: _.MSPACE
Command: *Cancel*

Command: *Cancel*

Command: *Cancel*

Command: *Cancel*

Command: Specify opposite corner:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: *Cancel*

Command: *Cancel*

Command: *Cancel*

Command: *Cancel*

Command: *Cancel*

Command: *Cancel*

Command: Specify opposite corner:
Command: Specify opposite corner:
Command: Specify opposite corner: _u
Invalid window specification.
Specify opposite corner: Specify opposite corner: _u
Invalid window specification.
Specify opposite corner: Specify opposite corner: _u
Invalid window specification.
Specify opposite corner: Specify opposite corner: _u
Invalid window specification.
Specify opposite corner: Specify opposite corner: _u
Invalid window specification.
Specify opposite corner: Specify opposite corner: _u
Invalid window specification.
Specify opposite corner: Specify opposite corner: _u
Invalid window specification.
Specify opposite corner: Specify opposite corner: _u
Invalid window specification.
Specify opposite corner: Specify opposite corner: _u
Invalid window specification.
Specify opposite corner: Specify opposite corner: _u
Invalid window specification.
Specify opposite corner: Specify opposite corner:
Command: Specify opposite corner:
Command: Specify opposite corner:
Command: _.PSPACE
Command: ‘_pan
Press ESC or ENTER to exit, or right-click to display shortcut menu.

Command:
Command: *Cancel*

Command: Specify opposite corner:
Command: *Cancel*

Command: _.MSPACE
Command: ‘_pan
Command: _.PSPACE
Command:
Command: _.erase 1 found

Command:
Command:
Command: _+vports
Tab index <0>: 0
Specify first corner or [Fit] :
Specify opposite corner: Regenerating layout.

Command: _.MSPACE
Command: ‘_pan
Command: ‘_PAN
Command:
PAN
Command: ‘_PAN
Command: _.PSPACE
Command: Specify opposite corner:
Command: *Cancel*

Command:
Automatic save to C:\Users\Fifi\appdata\local\temp\greenhouse_1_1_8467.sv$ …

Command:
Command:
Command:
Command: _ai_selall Selecting objects…done.

Stevy on November 26th, 2012

Stevy on November 13th, 2012

Production system: is a collection of people, equipment, and procedures organized to accomplish the manufacturing operations of a company (or other organization).

Production systems can be divided into two categories or levels as indicated in the following figure. The production system consists of facilities and manufacturing support systems.

The facilities of the production system consist of the factory, the equipment in the factory, and the way the equipment is organized.

Manufacturing support systems
This is the set of procedures used by the company to manage production and to solve the technical and logistics problems encountered in ordering materials, moving work through the factory, and ensuring that products meet quality standards. Product design and certain business functions are included among the manufacturing support systems.

In modern manufacturing operations, portions of the production system are automated and/or computerized. However, production systems include people. People make these systems work. In general, direct labor people (blue color workers) are responsible for operating the facilities, and professional staff people (white color workers) are responsible for the manufacturing support systems.

Production System Facilities

The facilities in the production system are the factory, production machines and tooling, material handling equipment, inspection equipment, and the computer systems that control the manufacturing operations. Facilities also include the plant layout, which is the way the equipment is physically arranged in the factory.
The equipment is usually arranged into logical groupings, and we refer to these equipment arrangements and the workers who operate them as the manufacturing systems in the factory. Manufacturing systems can be individual work cells, consisting of a single production machine and worker assigned to that machine.

We more commonly think of manufacturing systems as groups of machines and workers, for example, a production line. The manufacturing systems come in direct physical contact with the parts and/or assemblies being made. They “touch” the product. A manufacturing company attempts to organize its facilities in the most efficient way to serve the particular mission of that plant. One of the most important factors that determine the type of manufacturing is the type of products that are made.

Two types of manufacturing systems
1. Discrete manufacturing systems and
2. continuous manufacturing systems.

source:http://www.cadcambasics.com/

CAD

Stevy on November 13th, 2012

Computer Aided Design adalah suatu program komputer untuk menggambar suatu produk atau bagian dari suatu produk. Produk yang ingin digambarkan bisa diwakili oleh garis-garis maupun simbol-simbol yang memiliki makna tertentu. CAD bisa berupa gambar 2 dimensi dan gambar 3 dimensi.

Berawal dari menggantikan fungsi meja gambar kini perangkat lunak CAD telah berevolusi dan terintegrasi dengan perangkat lunak CAE (Computer Aided Engineering) dan CAM (Computer Aided Manufacturing. Integrasi itu dimungkinkan karena perangkat lunak CAD saat ini kebanyakan merupakan aplikasi gambar 3 dimensi atau biasa disebut solid modelling. Solid model memungkinkan kita untuk memvisualisasikan komponen dan rakitan yang kita buat secara realistik. Selain itu model mempunyai properti seperti massa, volume, pusat gravitasi , luas permukaan dll.

source: http://id.wikipedia.org/wiki/CAD

Stevy on November 13th, 2012

Welcome to Student.ipb.ac.id. This is your first post. Edit or delete it, then start blogging!